Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM26078
Volume:
7 |
10 |
Oct 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Because of its high hot strength and corrosion resistance, Inconel 825 superalloy has various industrial uses in the aerospace, nuclear, automotive, and defense industries. However, characteristics like as work hardening, poor heat conductivity, and chemical reactivity with tool material make it “difficult-to-machine.” Its machining via the traditional approach is difficult for industries. The machining behavior of Inconel 825 under distilled water-based minimum quantity lubrication (MQL) is examined in this work using a PVD- TiN/TiCN/TiN coated cermet insert. The tool’s tip temperature, cutting force, and flank wear are all investigated.
KEYWORDS
Publication Date
11/9/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
12
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...