Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM69297
Volume:
10 |
11 |
Nov 2026
Pages:
1-4
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Civil Engineering
P.R.Pote Patil College of Engineering And Management Amravati

Civil Engineering
P.R.Pote Patil College of Engineering And Management Amravati

Civil Engineering
P.R.Pote Patil College of Engineering And Management Amravati

Civil Engineering
P.R.Pote Patil College of Engineering And Management Amravati

Civil Engineering
P.R.Pote Patil College of Engineering And Management Amravati

Civil Engineering
P.R.Pote Patil College of Engineering And Management Amravati
This study investigates the development of sustainable geopolymer-based artificial aggregates using fly ash, the non-metallic fraction of electronic waste (NMF), and expired cement to reduce dependence on natural sources. Four mix proportions (M1 to M4) were prepared by varying these waste constituents, with M2—consisting of 50% fly ash, 40% NMF, and 10% expired cement is the optimum mix. The manufacturing process involved mixing the materials with an alkaline activating solution, casting, curing, crushing into aggregate-sized particles, and coating them with a geopolymer slurry. The resulting artificial aggregates were evaluated through standard physical and mechanical tests, including aggregate impact value, Los Angeles abrasion value and water absorption test. Ultimately, the study demonstrates the feasibility of utilizing these industrial and electronic wastes, contributing to sustainable construction practices by offering a viable, eco-friendly alternative to conventional natural aggregates.
KEYWORDS
The present study developed geopolymer-based artificial aggregates across four mix proportions (M1–M4) using fly ash (FA), the non-metallic fraction of electronic waste (NMF), and expired cement (EC). Produced via paste casting, thermal curing, crushing, and geopolymer slurry coating, the aggregates were evaluated for key physical, mechanical, and compressive strength properties, including aggregate impact, crushing, and Los Angeles abrasion values, water absorption. Among the proposed compositions, M2 (50% FA, 40% NMF, and 10% EC) is identified as the optimum mix due to its favourable balance between binder precursors and waste constituents.
1. Oktay, H., Yumrutaş, R., & Akpolat, A. (2015). Mechanical and thermophysical properties of lightweight aggregate concretes. Construction and Building Materials, 96, 217–225. https://doi.org/10.1016/j.conbuildmat.2015.08.015 2. Ye, W., Dai, M., Li, S., Hu, J., Li, S., & Tan, Y. (2025). Artificial aggregate as a sustainable substitute for natural aggregate in structure concrete applications. Journal of Building Engineering, 108, Article 112761. https://doi.org/10.1016/j.jobe.2025.112761 3. Kayali, O. (2008). Fly ash lightweight aggregates in high performance concrete. Construction and Building Materials, 22(12), 2393–2399. https://doi.org/10.1016/j.conbuildmat.2007.09.001 4. Ye, W., Li, S., Qiu, T., Cong, X., & Tan, Y. (2022). Effects of plastic coating on the physical and mechanical properties of the artificial aggregate made by fly ash. Journal of Cleaner Production, 360, Article 132187. https://doi.org/10.1016/j.jclepro.2022.132187 5. Ren, P., Ling, T. C., & Mo, K. H. (2021). Recent advances in artificial aggregate production. Journal of Cleaner Production, 291, Article 125215. https://doi.org/10.1016/j.jclepro.2020.125215 6. Bekkeri, G. B., Shetty, K. K., & Nayak, G. (2023). Synthesis of artificial aggregates and their impact on performance of concrete: A review. Journal of Material Cycles and Waste Management, 25(4), 1988–2011. https://doi.org/10.1007/s10163-023-01713-9 7. Priyankara, N. H., Wijesooriya, R. M. S. D., Jayasinghe, S. N., Wickramasinghe, W. R. M. B. E., & Yapa, S. T. A. J. (2009). Suitability of quarry dust in geotechnical applications to improve engineering properties. Engineer, 42(4), 7–13. https://doi.org/10.4038/engineer.v42i4.7088 8. Vijerathne, D., Wahala, S., & Illankoon, C. (2024). Impact of crushed natural aggregate on environmental footprint of the construction industry: Enhancing sustainability in aggregate production. Buildings, 14(9), Article 2770. https://doi.org/10.3390/buildings14092770 9. Ryłko-Polak, I., Komala, W., & Białowiec, A. (2022). The reuse of biomass and industrial waste in biocomposite construction materials for decreasing natural resource use and mitigating the environmental impact of the construction industry: A review. Materials, 15(12), Article 4078. https://doi.org/10.3390/ma15124078 10. Ciutac (Nicolaev), E., Ghisman, V., Iticescu, C., Tcaciuc, D., & Buruiana, D. L. (2026). Industrial waste recycling for sustainable building materials: A review. Buildings, 16(9), Article 1741. https://doi.org/10.3390/buildings16091741
Publication Date
11/20/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...