Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM23849
Volume:
7 |
6 |
Jun 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
In this project “Material weighing Conveyor”, instead of using manual inspection here we are introducing the automatic system by using the loadcell for weight measument. The sensors are used to measure the material presence and this signal is given to control Unit. The control unit gives the appropriate signal to the motor and separator. In this type of conveyor sensors are used to measure the presence of parts placed over it and a separator is placed next to the sensor which will remove the detective parts. By using this system, we completely eliminate manual work and reduce inspection time and also increase production rate.
KEYWORDS
Publication Date
6/23/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...