Modeling and Simulation of Wind Solar Hybrid System using Matlab/Simulink

Modeling and Simulation of Wind Solar Hybrid System using Matlab/Simulink

Mohammad Moin M. Tech Scholar CIST

Waseem Ali Asst Prof CIST Bhopal

ABSTRACT—This article is a simulation, designing and modeling of a hybrid power generation system based on nonconventional (renewable) solar photovoltaic and wind turbine energy reliable sources. The primary premeditated system is the solar electric generator, consisting of six models and series connected to each other, based on predicted-P&O and connected to a MPPT controller and DC/AC converter, system is associated with PMSG (permanent magnet synchronous generator). The main purpose of this article is to interconnect systems to generate maximum power for single auxiliary phase loading, as well as the solar PV generator and systems of wind turbines for simulation with execution use of Simulink / MATLAB. The results of this simulation indicate that the hybrid power system is planned for stability, reliability, efficiency and model. Solar PV generator and wind turbine from the use of a renewable energy source (for maximum voltage generation).The solar photovoltaic module executable in MATLAB / Simulink captures five parameters, series parameters and shunt resistance is an inverse photovoltaic saturation flow and an ideal factor.

Keywords—MPPT algorithms, irradiance, Perturb-observe, wind power etc.