Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM17112
Volume:
6 |
12 |
Dec 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Laser machining is a popular manufacturing process utilized to cut various types of materials economically. In this paper laser machining of Mild Steel has been investigated. Mild Steel is soft because of its high strength and malleability LBM is a precise and efficient manufacturing route in many applications. In the present research, Taguchi Method was used for analysis of effect of LBM process parameters on surface roughness (SR) on C-45 mold steel material. Different parameters like gas pressure, laser power and cutting speed are used to optimize surface roughness by MINITAB 19. Taguchi orthogonal array L9 along with ANOVA is used for optimizing three different parameters so that minimum surface roughness is obtained.
KEYWORDS
Publication Date
8/11/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...