Crossref DOIMemberCiteFactoropen accessissn
SJIF Impact Factor 8.659 | ISSN: 2582-3930
IJSREM Logo

International Journal of Scientific Research in Engineering and Management

(Gateway to Global Scholars - An International, Scholarly, Multi-Disciplinary, Open Access Journal)

Peer-Reviewed Journal Designed to Meet UGC's Quality Parameters

HomeCurrent IssuePast IssuesPay OnlineConferencesEditorial BoardAbout UsContact Us
IJSREM

Loading article...

Follow Us

  • Google Scholar
  • ResearchGate
  • Academia.edu
  • Mendeley
  • LinkedIn
  • Facebook
  • Instagram

Journal Policies

  • Peer Review Policy
  • Publication Ethics
  • Copyright Infringement
  • Refund & Cancellation Policy
  • Terms and Conditions
  • Privacy Policy

Journal Identifiers & Licenses

  • ISSN Verified: 2582-3930ISSN Verified: 2582-3930
  • Crossref DOI: 10.55041Crossref DOI: 10.55041
  • SJIF Ranking: 08.659SJIF Ranking: 08.659
  • Licensed under CC BY 4.0Licensed under CC BY 4.0
  • ISO Certification: 9001:2015ISO Certification: 9001:2015
  • Indexed & Cited In: Google ScholarIndexed & Cited In: Google Scholar

Contact Us

International Journal of Scientific Research in Engineering and Management (IJSREM)

#62/1, New No 7, 1st Cross, 2nd Main, Ganganagar, R T Nagar, Bangalore North, Bangalore, Karnataka, India – 560032
[email protected]+91 93911 67991
logos
logos
Working Hours

Mon – Sat: 9:00 AM – 6:00 PM

Sunday: 10:00 AM – 4:00 PM

+91 93911 67991

© 2026 IJSREM – International Journal of Scientific Research in Engineering and Management. This is an open-access journal. Articles are published under the Creative Commons Attribution (CC BY 4.0) License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

DisclaimerPrivacy PolicyTerms and Conditions
ArticlePeer ReviewedOpen AccessPlagiarism Passed
Paper ID:IJSREM68721

PERFORMANCE ASSESSMENT OF CEMENT KILN DUST STABILIZED CLAYEY SOIL REINFORCED WITH STEEL FIBERS

Stream/Area:

-

Subject:

-

Paper ID:

IJSREM68721

Volume:

10 |

11 |

Nov 2026

Pages:

1-12

Publication Frequency:

Monthly (12 issues per year)

DOI
Digital Object Identifier
10.55041/IJSREM68721

License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.

Share this article:

Authors

DSB

Devasye Singh Bhadwal

Civil Engineering

SSCET Badhani

Download Author Certificate
AS

Anoop Sharma

Civil Engineering

SSCET Badhani

Download Co-Author Certificate

Author Services & Downloads

Full ArticlesAcceptance Certificate

Abstract

The increasing generation of industrial by-products and the growing demand for sustainable ground improvement techniques have created a need for innovative methods of utilizing waste materials in geotechnical engineering. Cement kiln dust (CKD), a fine-grained by-product generated during cement manufacturing, possesses significant stabilizing potential due to its alkaline and cementitious characteristics. The present study therefore focuses on the performance assessment of CKD-stabilized clayey soil reinforced with steel fibers, with particular emphasis on its strength and load-bearing characteristics. In the proposed investigation, clayey soil will be treated with different proportions of CKD to determine its influence on the index and compaction characteristics of the soil. Steel fibers will subsequently be incorporated into the CKD-treated soil at selected dosages to provide mechanical reinforcement and improve resistance to tensile deformation and cracking. The stabilized mixtures will be evaluated through laboratory tests including Atterberg limits, standard Proctor compaction, unconfined compressive strength (UCS), and California Bearing Ratio (CBR). Selected specimens will also be subjected to different curing periods to examine the development of strength with time. The interaction between CKD and steel fibers is expected to produce a more stable soil matrix in which the chemical stabilization provided by CKD is complemented by the reinforcing and crack-bridging action of steel fibers. The study aims to establish the optimum combination of CKD and steel fiber that provides significant improvement in the engineering performance of clayey soil. The findings may provide a cost-effective, resource-efficient, and environmentally sustainable approach for improving weak clayey soils used in subgrades, embankments, and other geotechnical construction applications.

KEYWORDS

: Compaction test CBR UCS Steel Fiber CKD

Cite This Article

Devasye Singh Bhadwal, Anoop Sharma, "PERFORMANCE ASSESSMENT OF CEMENT KILN DUST STABILIZED CLAYEY SOIL REINFORCED WITH STEEL FIBERS," International Journal of Scientific Research in Engineering and Management, vol. 10, no. 11, pp. 1-12, Nov 2026. https://doi.org/10.55041/IJSREM68721

Full Article/Conclusion

Based on the experimental investigation of clayey soil stabilized with cement kiln dust (CKD) and reinforced with steel fibers, the following conclusions are drawn in accordance with the research objectives. 1.      The addition of CKD improved the compaction characteristics of clayey soil. The maximum dry density (MDD) increased from 15.18 to 17.82 kN/m³, while the optimum moisture content (OMC) decreased from 13.28% to 11.83%. This indicates an improvement in the compaction behavior of the treated soil. The addition of steel fibers at contents of 0.5%, 1.0% and 1.5% reduced the MDD from 15.18 to13.90 kN/m³, while the OMC increased from 13.28% to 14.40%. These changes indicate that steel fiber reinforcement influenced the packing arrangement and moisture requirements of the soil. 2.      The UCS results showed a progressive increase with increasing CKD content and curing period. At 15% CKD, the UCS reached 471 kPa after 7 days, 612 kPa after 14 days and 753 kPa after 28 days, compared with 168, 220 and 268 kPa, respectively, for virgin soil.Steel fiber reinforcement improved the UCS of clayey soil. Among the tested fiber contents of 0.5%, 1.0% and 1.5%, the highest UCS was obtained at 1.5% steel fiber, reaching 290 kPa, 377 kPa and 464 kPa after 7, 14 and 28 days of curing, respectively. The combined use of 15% CKD and steel fibers produced a further improvement in UCS. With 1.0% steel fiber, the UCS reached 490 kPa after 7 days, 635 kPa after 14 days and 780 kPa after 28 days. This combination exhibited the highest compressive strength among the tested CKD–fiber mixtures. 3.      The CBR results indicated that CKD improved the penetration resistance of the soil under both soaked and unsoaked conditions. At 15% CKD, the soaked and unsoaked CBR values increased from 2.8% and 4.6% for virgin soil to 6.5% and 9.1%, respectively. Steel fiber reinforcement alone increased the soaked CBR from 2.8% to 3.9% and the unsoaked CBR from 4.6% to 5.4% at 1.5% fiber content. The initial reduction in unsoaked CBR at 0.5% fiber indicates that the response to fiber addition was not uniformly positive at every dosage. The combined addition of 15% CKD and steel fibers further enhanced CBR performance. At 1.0% steel fiber, the soaked CBR reached 6.8%, while the unsoaked CBR increased to 9.5%. These were the highest values recorded among the tested combined mixtures. 4.      The compaction results for the combined mixtures showed that, with CKD fixed at 15% and steel fiber content varied from 0.5% to 1.0%, the reported MDD values ranged from 16.10 to 16.90kN/m³, while the OMC increased from 13.28% to 13.70%. These results suggest that the combined additives influenced the compaction behavior of the soil. The individual values should be checked against the laboratory records before final submission. 5.      Overall, the experimental results identify 15% CKD combined with 1.0% steel fiber as the best-performing tested combination for UCS and CBR. This mixture demonstrated improved strength and penetration resistance compared with virgin soil and may have potential for road subgrade applications, subject to applicable design criteria and further durability assessment.

References

1.     Vinod Kumar, Trilok Chand, Gaurav Gupta (2026), “Experimental Study on Cement Kiln Dust-Stabilized and Fibre-Reinforced Clayey Soil for Pavement Foundation Improvement”.  Proceedings of the 11th World Congress on Civil, Structural, and Environmental Engineering (CSEE 2026) Paris, France - April, 2026 Paper No. ICGRE 151, DOI: 10.11159/icgre26.151 2.     B. S. Pankaja1, N. H. Ranjita1, H. N. Ramesh1 (2023), “Suitability of Fly Ash-Cement Kiln Dust Columns for Stabilizing Expansive (Black Cotton) Soils”. Archives of Advanced Engineering Science 2025, Vol. 3(1) 44–50 DOI: 10.47852/bonviewAAES32021451. Received: 28 July 2023 | Revised: 9 August 2023 | Accepted: 19 October 2023 | Published online: 24 October 2023. 3.     Yusef Ahmed Fiener (2023), “Stabilization of Sabkha soil using Cement Kiln Dust (CKD)”. SEBHA UNIVERSITY JOURNAL OF PURE & APPLIED SCIENCES VOL.22 NO. 2 2023 DOI: 10.51984/JOPAS.V22I2.2509. 4.     Dr. Suhail A. Khattab Ibrahaim M. Al-Kiki AbdulRahman H. Al-Zubaydi (2023), “Effect of Steel Fibers on Mechanical Properties of Cement Stabilized Soil”. Anbar Journal for Engineering Sciences. 5.     Bharat Singh Chauhan, Bablu Kirar, and Bhagyachand Prajapati (2021), “Application of Steel Fiber in Soil Stabilization”. The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2021 T. G. Sitharam et al. (eds.), Ground Improvement Techniques, Lecture Notes in Civil Engineering 118, https://doi.org/10.1007/978-981-15-9988-0_1. 6.     Sadegh Ghavami, Mehrdad Rajab (2020), “Investigating the Influence of the Combination of Cement Kiln Dust and Fly Ash on Compaction and Strength Characteristics of High-Plasticity Clays”. Journal of Civil Engineering and Materials Application. J. Civil Eng. Mater.App. 2021 (March); 5(1): 09-16. 7.     Mohamed Sakr, Ahmed M. Nasr and Doaa Asal (2020), “Behavior of Collapsible Soils Improved by Fly Ash and Cement Kiln Dust”. Journal of Engineering Research (ERJ). Volume 2, 2020. 8.     dr inż. Tomasz Zdeb, dr hab. inż. Tomasz Tracz (2020), “Analysis of protective properties of soil-cements towards reinforcing Steel”. T. Zdeb, T. Tracz, M. Żelazik, Cement Wapno Beton, 25 (2020), 61-71 doi: https://doi.org/10.32047/CWB.2020.25.1.7. 9.     Dhyanendra Singh Rajput, Mukesh Pandey (2018), “STUDY OF STABILITY OF SOIL WITH USING STEEL FIBER”. International Journal of Advance Engineering and Research Development Volume 5, Issue 04, April -2018. Scientific Journal of Impact Factor (SJIF): 5.71 10.  Shubham More, Apeksha Lokhande, Shaikh Sabir (2018), “Stabilization of Black Cotton Soil by Using Steel Slag”. International Journal of Innovative Research in Science, Engineering and Technology. Vol. 7, Issue 5, May 2018.

Editorial & Review Transparency

Publication Date

11/5/2026

Peer Review Type

Double-Blind Peer Review

Review Rounds: 2

Documents

Review Report (Confidential)
Copyright Form (Office)

Article Metrics & Impact

Article Views

0

Total views since publication

PDF Downloads

5

Total downloads since publication

Geographic Reach

5

Indexing, Archiving & Preservation

Google Scholar
Academia
ResearchGate
Crossref
SSRN
Semantic Scholar
Thomson Reuters
WorldCat
Mendeley
OpenAlex
EBSCO
Zenodo

Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.

Ethics, Compliance & Transparency

Plagiarism Screening

This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.

Conflict of Interest

The authors declare no conflict of interest related to this research work.

Funding Information

No funding information available for this research.

Similar & Recommended Articles

Similar Articles by Topic

Related research in the same subject area

Loading similar articles...