PLC Based Transformer Protection from Over Voltage and Under Voltage
Mr.P.Ravi Kumar 1 , Mr.Varanasi Vamsi2 , Mr.Kotyada Anil Kumar3 , Ms.Kundrapu Akhila4 , Mr.Komarthi Sai Bhanu5
1Mr.P.Ravi Kumar (M .Tech), Assistant Professor , Department Of Electrical and Electronics Engineering , Raghu Engineering College[REC]
2Mr.Varanasi Vamsi , Student , Department Of Electrical and Electronics Engineering , Raghu Engineering College[REC]
3Mr.Kotyada Anil Kumar , Student , Department Of Electrical and Electronics Engineering , Raghu Engineering College[REC]
4Ms.Kundrapu Akhila , Student , Department Of Electrical and Electronics Engineering , Raghu Engineering College[REC]
5Mr.Komarthi Sai Bhanu , Student , Department Of Electrical and Electronics Engineering , Raghu Engineering College[REC]
Abstract:- A PLC (Programmable Logic Controller) based transformer protection system is an electronic system designed to protect industrial transformers from various electrical faults and abnormalities. The system utilizes sensors to detect electrical parameters such as voltage, current, and temperature and uses a PLC to process the data and control the transformer's operation. The protection system can be programmed to detect faults such as overload, overvoltage, undervoltage, phase loss, phase reversal, and over-temperature conditions. Once a fault is detected, the PLC will automatically shut down the transformer to prevent further damage. The system provides reliable and accurate protection to the transformer, reducing the risk of costly downtime and repairs. Transformer protection from over and under voltages is a critical aspect of any transformer control system. Overvoltage can damage the transformer's insulation, bearings, and winding, while undervoltage can cause the transformer to stall or overheat. To protect the transformer from these conditions, various protection devices can be employed, including overload relays, circuit breakers, and voltage monitors. To protect against overvoltage, a voltage monitor can be installed, which will detect any voltage spikes or surges and trigger an alarm or shut down the transformer if the voltage exceeds a predetermined threshold. Similarly, an undervoltage relay can be used to protect the transformer from low voltage conditions. The undervoltage relay will monitor the voltage levels and shut down the transformer if the voltage drops below a certain level..
Key Words:-PLC (Programmable Logic Controller), SMPS, Voltage Controlled Relay, LED indicators, Transformer and Dimmer.
