Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68720
Volume:
10 |
11 |
Nov 2026
Pages:
1-2
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Electronics And Telecommunication Engineering
Bhagwant Institute Technology , Barshi
Electronics And Telecommunication Engineering
Bhagwant Institute Technology , Barshi
Electronics And Telecommunication Engineering
Bhagwant Institute Technology , Barshi
Electricity theft and unauthorized use of electrical power can cause revenue loss and affect accurate energy accounting. This paper presents an Arduino-based prototype for monitoring a single-phase energy meter and providing an alert when a programmed abnormal condition is detected. The system uses an Arduino Uno as the main controller. An LCD display shows the system status, while a buzzer gives an audible warning. A relay module is included for controlled switching in the prototype, and a step-down transformer is used in the low-voltage power-supply section. The proposed model demonstrates a simple approach to energy monitoring and alert generation. Its detection performance depends on the sensing method, meter interface and detection logic implemented in the final hardware.
KEYWORDS
The Power Theft Detection Using Arduino project demonstrates a microcontroller-based approach to energy monitoring and alert generation. The energy meter, Arduino Uno, LCD, buzzer, relay module and step-down transformer form the main components. The system displays information and provides an alert when the programmed condition is met. Future improvements may include a clearly defined sensing interface, data logging and remote monitoring.
The Power Theft Detection Using Arduino project demonstrates a microcontroller-based approach to energy monitoring and alert generation. The energy meter, Arduino Uno, LCD, buzzer, relay module and step-down transformer form the main components. The system displays information and provides an alert when the programmed condition is met. Future improvements may include a clearly defined sensing interface, data logging and remote monitoring.
Publication Date
11/5/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
5
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...