Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM30854
Volume:
8 |
4 |
Apr 2024
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
A marigold flower petal separating machine has been fabricated. The machine is fabricated for separating flower in two different parts, upper part consist of petals and lower part consisting of seeds. This project focuses in design fabrication of mechanical part of machine and the system of petal and seed separating machine. To achieve this project objective, the machine body structure and the mechanical system need to analyses some other criteria such as performance, strength, safety, and ergonomic design. Design of Model (Mechanism). Fabrication of Model setup as per CAD or CREO design. Conducting Experiment on the Model setup. Results and discussions. Conclusion as per results. After testing and obtaining results the conclusion of project will be done and put to use.
KEYWORDS
Publication Date
12/31/45406
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...