Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM69238
Volume:
10 |
11 |
Nov 2026
Pages:
1-4
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Electronics Engineering
M. S. Bidve Engineering College Latur
Electronics Engineering
M. S. Bidve Engineering College Latur
Electronics Engineering
M. S. Bidve Engineering College Latur
Electronics Engineering
M. S. Bidve Engineering College Latur
Electronics Engineering
M. S. Bidve Engineering College Latur
The Smart Garden Light is an automatic lighting system designed to control garden lights according to the surrounding light intensity. The system uses an Arduino Uno microcontroller and a Light Dependent Resistor (LDR) sensor to detect the amount of natural light present in the environment. When sufficient daylight is available, the garden LEDs remain OFF. When the surrounding light becomes low, the Arduino automatically increases the brightness of the LEDs. This system helps reduce unnecessary electricity consumption and provides automatic garden illumination without requiring manual operation. The project uses an LDR sensor, Arduino Uno, RGB LEDs, resistors, and a regulated power supply. The system is simple, cost-effective, and suitable for small gardens and outdoor lighting applications.
KEYWORDS
This paper presents a Smart Garden Light system using an LDR sensor and Arduino Uno. The system integrates ambient-light sensing, microcontroller-based processing, and PWM-controlled LED brightness adjustment. The LDR detects changes in surrounding illumination and sends a corresponding analog signal to the Arduino. Based on the sensor reading, the controller adjusts the brightness of red, green, and blue LEDs. Under bright daylight conditions, all three LEDs remain OFF. As natural light decreases, the LEDs gradually become brighter and provide illumination during dark conditions.
[1] Arduino, "Arduino Uno Rev3: Official Board Documentation." Available: https://docs.arduino.cc/hardware/uno-rev3/ [2] Arduino, "Arduino Programming Language Reference." Available: https://docs.arduino.cc/language-reference/ [3] Gontla Tarun et al., "Movement Based Automatic Intensity Control of Street Light," 2024. [4] Soham Dey et al., "Energy Efficient Smart Street Lighting System Using Arduino," 2026. [5] M. Margolis, Arduino Cookbook, 2nd ed. Sebastopol, CA, USA: O'Reilly Media. [6] J. Boxall, Arduino Workshop: A Hands-On Introduction with 65 Projects. San Francisco, CA, USA: No Starch Press. [7] LDR Sensor Datasheet and Technical Specifications. [8] RGB LED Datasheet and Technical Specifications.
Publication Date
11/19/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...