Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68857
Volume:
10 |
11 |
Nov 2026
Pages:
1-14
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Department of Civil Engineering
Rajarajeshwari College of Engineering
Department of Civil Engineering
Rajarajeshwari College of Engineering
Spherical base isolation systems, especially friction pendulum systems (FPS), are extensively investigated as a means of reducing the transfer of earthquake induced forces from the ground to the superstructure. However, conventional fixed-base structural systems, which resist earthquake loading predominantly through strength and ductility, spherical sliding isolation systems acquaint a regulated sliding interface between the foundation and the superstructure. The sliding surface furnishes a gravity-based restoring mechanism, while friction at the sliding interface contributes to energy dissipation. These characteristics enable the isolation period and displacement response to be modified through bearing geometry, friction properties and axial loading. This review scrutinizes the technology, fundamental mechanics, classifications, experimental investigations, numerical modelling approaches and practical applications of spherical base isolation systems. Specifically consider single-concave, double-concave, triple friction pendulum and other multistage configurations. Furthermore, the review contemplates Hybrid spherical isolation systems that link frictional pendulum bearings with supplementary energy-dissipation, as well as viscous dampers, inverter-based devices, shape-memory alloy components and uplift restraint mechanisms. The Literature indicates multistage and hybrid systems can furnish greater flexibility in controlling displacement, stiffness and energy dissipation than conventional single- surface bearings. However, their result is persuaded by frictional variability, sliding velocity, contact pressure, temperature, vertical ground motion, near-fault pulse effects and long-term changes in bearing properties. Lately research published journals has outstretched the field towards variable-friction numerical elements, full-scale testing, torsional response, seismic resilience assessment, hybrid inverter system and uplift resistant configurations. The review determines various fields entail further investigation, specifically long-term field performance, experimental validation of integrated hybrid systems, reliable modelling of frictional behaviors, performance under near-fault and vertical ground motion and cost-effective design optimization. Ultimately the spherical base isolation remains a promising seismic protection technology. However, more comprehensive application depends on upgrading the reliable design and establishing stronger links between analytical predictions, experimental evidence and actual structural performance.
KEYWORDS
· Spherical sliding bearings provide an effective seismic isolation through gravity-induced restoring action and frictional energy dissipation. The fundamental operating principle was established in early research and thereafter validated experimentally. · The development of double-concave, triple friction pendulum and multi-stage spherical bearings has enhanced the displacement capacity and adaptability of isolation systems. These configurations allow variations in effective stiffness and damping as the bearing moves between different sliding stages. · Seismic performance is strongly influenced by frictional characteristics. Variations in sliding velocity, vertical pressure, temperature and accumulated sliding distance can affect bearing response. Realistic friction models and experimental characterization are therefore essential. · Near-fault excitation, vertical ground motion and structural irregularities can influence isolated-structure response. Far-field records solitary may not adequately evaluate the severe earthquake conditions. · Hybrid spherical isolation is a promising direction. Viscous dampers and inverter systems provide additional possibilities to control isolation displacement and superstructure acceleration. · The effectiveness of hybrid isolation depends on appropriate selection of supplementary-device parameters. Extravagant damping or restoring stiffness may increase force transfer and minimize the isolation effectiveness. · The available literature indicates a need for more experimental validation of complete hybrid systems. Full-scale testing, durability assessment and advanced nonlinear modelling are important for establishing practical reliability. · Future research should focus on multi-objective optimization, improved friction characterization, residual displacement control, multi-directional earthquake response and performance-based seismic design. Overall, spherical sliding isolation has been developed from a standard passive friction pendulum mechanism into a extensive clan of adaptive and hybrid seismic protection technologies. Further research into the connection between spherical bearings and supplementary response-control devices could contribute to more credible and resilient earthquake-resistant structural systems.
[1] Zayas, V. A., Low, S. S., and Mahin, S. A. (1990). A simple pendulum technique for achieving seismic isolation. Earthquake Spectra, 6(2), 317–333. [2] Mokha, A. S., Constantinou, M. C., Reinhorn, A. M., and Zayas, V. A. (1991). Experimental study of friction-pendulum isolation system. Journal of Structural Engineering, 117(4), 1201–1217. [3] Mokha, A. S., Constantinou, M. C., and Reinhorn, A. M. (1990). Teflon bearings in base isolation I: Testing. Journal of Structural Engineering, 116(2), 438–454. [4] Constantinou, M. C., Mokha, A. S., and Reinhorn, A. M. (1990). Teflon bearings in base isolation II: Modeling. Journal of Structural Engineering, 116(2), 455–474. [5] Mokha, A. S., Constantinou, M. C., and Reinhorn, A. M. (1991). Further results on the frictional properties of Teflon bearings. Journal of Structural Engineering, 117(2), 622–626. [6] Mokha, A. S., Constantinou, M. C., and Reinhorn, A. M. (1993). Verification of friction model of Teflon bearings under triaxial load. Journal of Structural Engineering, 119(1), 240–261.
Publication Date
11/10/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
1
Total views since publication
PDF Downloads
5
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...