Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM47365
Volume:
9 |
5 |
May 2025
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The spring-damper system is modelled and simulated in this paper using MSC Adams software. Analyzing the static equilibrium force produced in a spring-damper attached to a rigid body is the goal. Using constraints to limit motion and applying gravity in the negative Y direction, a mechanical model was constructed in Adams/view. The system was simulated after the required mass attributes were assigned and a translation joint was added. To verify the accuracy of the model, the static equilibrium force derived from the simulation was contrasted with analytically computed values.
KEYWORDS
Publication Date
5/9/2025
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
0
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...