Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68803
Volume:
10 |
11 |
Nov 2026
Pages:
1-7
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Civil Engineering
Sanketika Vidya Parishad Engineering College
Assistant Professor, Department of Civil Engineering,
Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India
Waste tyres are non-biodegradable and accumulate in large stockpiles, while concrete production consumes ever larger quantities of natural aggregate. This study investigates M25 concrete in which crumb rubber from scrap tyres partially replaces coarse aggregate by volume at 0%, 5%, 10%, 15%, 20% and 25%. The mix was designed as per IS 10262:2019 for a target mean strength of 31.6 MPa with a water–cement ratio of 0.49 and proportions of 1:2.03:3.38. Compressive strength at 7 and 28 days, split tensile strength, flexural strength, residual compressive strength after immersion in 5% and 10% HCl and H₂SO₄, and residual strength after exposure to 200 °C and 400 °C were determined. The 28-day compressive strength rose from 32.89 MPa for conventional concrete to 35.56 MPa at 15% replacement (+8.1%) but fell to 24.08 MPa and 17.60 MPa at 20% and 25%. Split tensile strength peaked at 3.04 MPa at 15% replacement (+10.5%). Up to 15% replacement, the rubberised mixes retained more strength than conventional concrete under acid attack and elevated temperature; after 10% H₂SO₄ exposure, the 15% mix retained 22.43 MPa against 19.26 MPa for the control. A crumb rubber content of 10–15% is recommended for M25 concrete.
KEYWORDS
1. Crumb rubber can replace up to 15% of the coarse aggregate in M25 concrete while increasing the 28-day compressive strength from 32.89 MPa to 35.56 MPa (+8.1%); at 20% and 25% replacement the strength falls to 24.08 MPa and 17.60 MPa, below the target grade. 2. Split tensile strength increased to 3.04 MPa at 15% replacement (+10.5%) and flexural strength to its maximum at 10% replacement (+8.3%); tensile behaviour is less sensitive to rubber content than compressive strength. 3. Mixes with up to 15% crumb rubber retained more compressive strength than conventional concrete after HCl and H₂SO₄ immersion. H₂SO₄ was the more aggressive acid, and the 15% mix retained 22.43 MPa after 10% H₂SO₄ against 19.26 MPa for the control. 4. After exposure to 200 °C and 400 °C, the 15% mix again showed the highest residual strength (36.45 and 36.12 MPa), with negligible additional loss between the two temperatures. 5. A crumb rubber content of 10–15% by volume of coarse aggregate is recommended for M25 concrete, providing better strength and durability while recycling waste tyres and conserving natural aggregate. Further work should examine treated rubber, longer exposure periods, microstructure and the structural behaviour of crumb rubber concrete members.
[1] S. Mishra, S. Panda, D. Bhowmik, and S. Guha, "Experimental and analytical evaluation of crumb rubber concrete with multi-blended industrial waste aggregate and SCMs: Strength, durability, microstructure, and ML prediction," Construction and Building Materials, vol. 516, Art. no. 145677, 2026, doi: 10.1016/j.conbuildmat.2026.145677. [2] A. Sofi, P. Nagarajan, and T. S. Kumanan, "Machine learning approach for predicting the influence of pulverized waste tire rubber fines as a sustainable cement alternative in concrete," Waste Management, vol. 214, Art. no. 115396, 2026, doi: 10.1016/j.wasman.2026.115396. [3] A. J. Kilani, B. D. Ikotun, and R. Abdulwahab, "Effect of crumb rubber on concrete's and mortar's structural properties: A review," Iranian Journal of Science and Technology, Transactions of Civil Engineering, vol. 49, pp. 1037–1067, 2025, doi: 10.1007/s40996-024-01647-8. [4] S. Zhai, J. Hu, R. Hai, L. Cui, Y. Zhang, L. Yang, J. Zhang, Y. Zhang, L. Liu, and Y. Sun, "Investigation on the durability performance and mechanism analysis of modified crumb rubber concrete," Construction and Building Materials, vol. 471, Art. no. 140746, 2025, doi: 10.1016/j.conbuildmat.2025.140746. [5] F. Ren, J. Mo, Q. Wang, S. Tian, M. Lai, and J. C. M. Ho, "Fillers to improve the ductility and impermeability of crumb rubber concrete," Construction and Building Materials, vol. 425, Art. no. 136073, 2024, doi: 10.1016/j.conbuildmat.2024.136073. [6] A. B. Barmoh, D. O. Koteng, and C. Miruka, "Influence of partial replacement of fine aggregate with varying amounts of different particle sizes of treated crumb rubber on the mechanical and durability properties of high-strength concrete," International Journal of Engineering Trends and Technology, vol. 71, no. 6, pp. 169–180, 2023, doi: 10.14445/22315381/IJETT-V71I6P219. [7] S. He, Z. Jiang, H. Chen, Z. Chen, J. Ding, H. Deng, and A. S. Mosallam, "Mechanical properties, durability, and structural applications of rubber concrete: A state-of-the-art review," Sustainability, vol. 15, no. 11, Art. no. 8541, 2023, doi: 10.3390/su15118541. [8] S. Muhammad, Q. Yuan, M. Alam, M. F. Javed, M. F. Rehman, and A. Mohamed, "Fresh and hardened properties of waste rubber tires based concrete: A state of the art review," SN Applied Sciences, vol. 5, Art. no. 119, 2023, doi: 10.1007/s42452-023-05336-5. [9] A. S. Sidhu and R. Siddique, "Durability assessment of sustainable metakaolin based high strength concrete incorporating crumb tire rubber," Journal of Building Engineering, vol. 72, Art. no. 106660, 2023, doi: 10.1016/j.jobe.2023.106660. [10] A. S. Sidhu and R. Siddique, "Utilisation of crumb tire rubber in development of sustainable metakaolin based high strength concrete," Construction and Building Materials, vol. 345, Art. no. 128412, 2022, doi: 10.1016/j.conbuildmat.2022.128412.
Publication Date
11/6/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
4
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...