Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM16563
Volume:
6 |
10 |
Oct 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
This paper investigates the laser beam machining of SS-304. In this research work, the effects of three parameters, namely, gas pressure, laser power and cutting speed were studied upon taper and Surface roughness. The objective was to study the effect of input parameter individually on the final outcome. Response surface methodology was used to design the experiments and the performance characteristics in LBM operation were studied. The experimental result indicate that laser power is the most significant factor. At high values of laser power, taper and surface roughness were found high.
KEYWORDS
Publication Date
11/9/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...