STUDY ON STRENGTH PARAMETERS ON FIBERS USING M30 CONCRETE

STUDY ON STRENGTH PARAMETERS ON FIBERS USING M30 CONCRETE

1 BIKRAM JENA, 2Dr.RAGHVENDRA SAHU

1PG SCHOLOR, 2ASSISTANT PROFESSOR,

1Department of CIVIL ENGINEERING,

1GIET UNIVERSITY, GUNUPUR, INDIA

_____________________________________________________________________________________________________

Abstract:  This project work is associate degree experimental investigation on the influence of polyester and glass fibers on mechanical properties of the concrete employed in Construction. during this study 2 varieties of concrete mixes were ready one by one. polyester of 1% to 4% and Glass fiber of 1% to 3% by weight of cement were further to the mixes. A comparative analysis has been allotted for typical concrete with regard to the fiber strengthened in regard to their Compressive, Spilt tensile and Flexural Strength properties. because the Fiber content will increase Compressive, spilt tensile and Flexural Strengths area unit proportionately increasing. it's discovered that fibers multiplied on the far side 3% polyester and 2% glass fiber content leads to decrease in strengths. Economic analysis is indicating that with the addition of polyester and glass fibers will increase in economy results in higher initial value by eight to Martinmas is balanced by the reduction in maintenance and rehabilitation operations by using Fiber concrete as compared thereto of typical Concrete.