Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68937
Volume:
10 |
11 |
Nov 2026
Pages:
1-8
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Department of Civil Engineering,
Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India
Department of Civil Engineering,
Sanketika Vidya Parishad Engineering College, P.M. Palem, Visakhapatnam – 530041, Andhra Pradesh, India
The present study investigates the use of fly ash, quarry dust and jarofix as partial replacements for natural river sand in concrete masonry blocks, with manufactured sand and lateritic waste also included in selected experimental and sustainability comparisons. Concrete mixes were studied at replacement levels of 0–100%, using 1:2:4 and 1:4:8 proportions and a selected water-to-cement ratio of 0.50. the experimental programmeed 28-day cube strength reached 9.41 MPa at 20% fly ash, 9.15 MPa at 30% quarry dust and 11.00 MPa at 30% jarofix. For 1:4:8 masonry blocks, the corresponding reported strengths were 6.62, 6.38 and 7.19 MPa, respectively, compared with 5.18 MPa for the control. Jarofix blocks also achieved a reported masonry prism efficiency of 81.45%. The study further examined density, water absorption, thermal conductivity, chemical exposure and a weighted sustainability index. The results indicate that selected waste-derived fine aggregates can improve block strength and reduce reliance on river sand. However, inconsistencies in mix identification, exposure-test reporting, material scope and sustainability-index calculations require clarification before the findings are treated as definitive.
KEYWORDS
The experimental results indicate that partial replacement of natural river sand with selected waste-derived fine aggregates can improve the compressive strength of concrete masonry blocks. Among the alternatives with complete tabulated results, jarofix at 30% replacement produced the highest reported 28-day block strength (7.19 MPa), prism failure load (430 kN) and masonry strength (5.375 MPa). Fly ash at 20% and quarry dust at 30% also improved block strength relative to the control. These findings indicate the potential of selected industrial and quarry by-products for masonry-unit production, subject to material characterization and environmental-safety assessment. Mechanical performance and other physical properties did not improve uniformly. Water absorption increased with replacement level, while thermal conductivity depended on the alternative material. The sustainability indices favoured selected mixtures but were derived from a restricted two-criterion scoring method and should not be interpreted as an LCA. Before publication, the mix-design details, chemical-exposure records, applicable standards, embodied-energy calculations and statistical variability should be verified. Further work should include leaching and contaminant-mobility testing, particularly for jarofix-containing blocks, together with longer-term durability and field validation.
[1] M. N. Akhtar and D. A. H. Malkawi, “Sustainable concrete hollow blocks using composite waste replacing fired clay bricks—An experimental study,” Sustainability, vol. 17, no. 24, Art. no. 10963, 2025, doi: 10.3390/su172410963. [2] P. Asokan, M. Saxena, and S. R. Asolekar, “Hazardous jarosite use in developing non-hazardous product for engineering application,” Journal of Hazardous Materials, vol. 137, no. 3, pp. 1589–1599, 2006, doi: 10.1016/j.jhazmat.2006.05.060. [3] M. M. M. Dafedar, K. B. Rao, B. H. V. Pai, et al., “Evaluation of the engineering properties and sustainability of solid masonry blocks produced with recycled concrete aggregates,” Innovative Infrastructure Solutions, vol. 9, Art. no. 449, 2024, doi: 10.1007/s41062-024-01720-1. [4] K. Hu, S. T. A. Gillani, X. Tao, J. Tariq, and D. Chen, “Eco-friendly construction: Integrating demolition waste into concrete masonry block production,” Construction and Building Materials, vol. 460, Art. no. 139797, 2025, doi: 10.1016/j.conbuildmat.2024.139797. [5] IS 2185 (Part 1):2005, Concrete Masonry Units—Specification, Bureau of Indian Standards, New Delhi, India. [6] IS 2386 (Part III):1963, Methods of Test for Aggregates for Concrete—Specific Gravity, Density, Voids, Absorption and Bulking, Bureau of Indian Standards, New Delhi, India. [7] IS 1905:1987, Code of Practice for Structural Use of Unreinforced Masonry, Bureau of Indian Standards, New Delhi, India. [8] IS 3346:1980, Method for Determination of Thermal Conductivity of Thermal Insulation Materials, Bureau of Indian Standards, New Delhi, India. [9] V. Karra, M. E. Raghunandan, and B. Manjunath, “Partial replacement of fine aggregates with laterite in GGBS-blended concrete,” Advances in Concrete Construction, vol. 4, no. 3, pp. 221–232, 2016, doi: 10.12989/acc.2016.4.3.221. [10] C. J. Kibert, “The next generation of sustainable construction,” Building Research & Information, vol. 35, no. 6, pp. 595–601, 2007, doi: 10.1080/09613210701467040.
Publication Date
11/13/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
1
Total views since publication
PDF Downloads
6
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...