Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM68723
Volume:
10 |
11 |
Nov 2026
Pages:
1-15
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
Civil Engineering
SSCET Badhani
Civil Engineering
SSCET Badhani
The sustainable management of industrial by-products and the improvement of weak soils are two major challenges in modern geotechnical engineering. The present study explores the combined utilization of steel slag and polypropylene fibers for improving the engineering performance of soil while promoting the beneficial reuse of waste materials. Steel slag, generated in large quantities during steel production, has the potential to act as a granular stabilizing material because of its hard, angular, and durable particles. Polypropylene fibers, on the other hand, can provide additional reinforcement by improving interparticle bonding and restricting the development of cracks and deformation within the soil matrix. In this investigation, steel slag is incorporated into the soil at 10%, 15%, and 20%, while polypropylene fibers are added at 0.50%, 0.75%, and 1.00% by dry weight of soil. The stabilized soil mixtures will be systematically evaluated to examine the influence of individual and combined additions on their engineering behavior. The experimental programme will include Atterberg limits, standard Proctor compaction, unconfined compressive strength (UCS), and California Bearing Ratio (CBR) tests. The results will be analyzed to identify the optimum combination of steel slag and polypropylene fiber that provides the most favorable improvement in strength and load-bearing characteristics. The steel slag is anticipated to enhance the soil’s stiffness and frictional resistance, whereas the polypropylene fibers are expected to contribute tensile reinforcement and improve resistance to cracking and deformation. The study aims to demonstrate that the appropriate combination of steel slag and polypropylene fibers can provide a cost-effective, durable, and sustainable approach to soil improvement. Furthermore, the utilization of steel slag can reduce the environmental problems associated with industrial waste disposal and minimize the dependence on conventional stabilization materials, contributing to more resource-efficient and environmentally responsible geotechnical construction practices.
KEYWORDS
The experimental study on stabilization of clay soil using Steel Slag and Polypropylene Fibers has resulted in the following conclusions: 1. The combined use of Steel Slag and Polypropylene (PP) fibers improved the geotechnical properties of clayey soil, demonstrating their potential for soil stabilization applications. 2. The Standard Proctor test showed that the addition of steel slag and PP fibers influenced the maximum dry density (MDD) and optimum moisture content (OMC). At a fixed steel slag content of 15%, increasing Polypropylene (PP) fiber content from 0.5% to 1.0% resulted in a decrease in MDD from 15.60 to 14.80 and an increase in OMC from 15.90% to 16.60%. At a fixed steel slag content of 20%, increasing PP fiber content from 0.5% to 1.0% increased MDD from 16.40 to 16.90 and reduced OMC from 14.90% to 14.20%. 3. The results indicate that the effect of PP fibers on compaction characteristics depends on the Steel Slag content. At 15% steel slag, MDD decreased and OMC increased, whereas at 20% steel slag, MDD increased and OMC decreased. 4. The UCS value increased from 240kN/m² to 490kN/m² after 7 days of curing, from 312 kN/m² to 637 kN/m² after 14 days, and from 360kN/m² to 686kN/m² after 28 days when 15% steel slag and 1.0% PP fiber were used. 5. The soaked CBR value increased from 2.4% for virgin soil to 5.1% with 15% steel slag and 1.0% PP fiber, indicating improved resistance to penetration under soaked conditions. The unsoaked CBR value increased from 3.7% to 7.1% at the same combination, demonstrating enhanced bearing capacity compared with untreated soil. 6. Based on the tested combinations, 15% steel slag with 1.0% PP fiber produced the maximum reported CBR and UCS values. This combination appears promising for improving the engineering performance of clayey soil.
1. Shantanu Paul, Md.MonirulIslam (2026), “Sustainable Stabilization of Expansive Clay Using Lime and Steel Slag”. Advances in Materials Science and Engineering, 2026; 2026: 2024022. https://doi.org/10.1155/amse/2024022 2. Degou Cai, Mingzhe Ouyang (2025), “Performance Evaluation of Stabilized Soils with Selected Common Waste Materials of Rice Husk Ash, Steel Slag and Iron Tailing Powder”. Materials 2025, 18, 346. https://doi.org/10.3390/ma18020346. Copyright: © 2025 by the authors. Licensee MDPI, Basel, Switzerland. 3. Sher Shah, Muhammad Siyab Khan, Muhammad Farhan Aslam (2025), “Sustainable Solutions for Clayey Soil Improvement: A Study of Steel Slag and Glass Powder”. International Journal of Environmental Sciences ISSN: 2229-7359 Vol. 11 No. 23s, 2025 4. Xianzeng Shi, Lei Xu, Kai Huang (2024), “Study on the Mechanical Properties and Microstructure of Soil Stabilized with Alkali-Activated Slag–Steel Slag–Silica Fume”. Journal of Testing and Evaluation. Journal of Testing and Evaluation, doi:10.1520/JTE20240254. Copyright © 2024 by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. 5. Haojie Li , Xianxi Tang (2023), “Mechanical Properties and Microscopic Study of Steel Slag–Fly Ash-Solidified Loess under Alkaline Conditions”. Appl. Sci. 2023, 13, 8737. https://doi.org/10.3390/app13158737 Academic Editor: Ana Martins Amaro. 6. Jyotesh Kumar Choudhary1, Udai Kumar Singh (2022), “Study on Stabilization of Soil Using Polypropylene Fiber waste”. International Research Journal of Engineering and Technology (IRJET) Volume: 09 Issue: 01 | July 2022. 7. Ghanbari M and Bayat M (2022), “Effectiveness of Reusing Steel Slag Powder and Polypropylene Fiber on the Enhanced Mechanical Characteristics of Cement-Stabilized Sand”. Civil Engineering Infrastructures Journal 2022, 55(2): 241-257 DOI: 10.22059/CEIJ.2021.319310.1742. 8. Kavita Pawar, Ganesh Handibagh, Mayuri Dohitare (2022), “Influence of Steel Slag Addition on Strength Characteristics of Clayey Soil”. International Journal for Research in Applied Science & Engineering Technology (IJRASET). ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.538. Volume 10 Issue IV Apr 2022. 9. Sarah A. Hussein (2019), “Stabilization of Expansive Soils Using Polypropylene Fiber”. Civil Engineering Journal Vol. 5, No. 3, March, 2019. 10. Rachit Mishra, Mohit Verma (2019), “Stabilization of Black Cotton Soil using Surkhi and Polypropylene Fiber Material”. International Journal for Research in Applied Science & Engineering Technology (IJRASET) ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 6.887 Volume 7 Issue II, Feb 2019.
Publication Date
11/5/2026
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
6
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...