Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM18612
Volume:
7 |
4 |
Apr 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The present paper reports the fabrication of an efficient ACTFEL device using a thermal annealing technique. The intensity of an alternating current thin-film electroluminescent (AC-TFEL) device depends on the applied voltage. With the drive voltage at 1 Khz for the thermal annealed devices an increase of electroluminescence with growing fluence of the thermal annealing pulse is determined. With incident fluencies of about 1 Joule/cm2, the thermal annealed devices exhibit luminance over that produced by the thermal annealed devices.
KEYWORDS
Publication Date
4/3/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
6
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...