Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM15633
Volume:
6 |
7 |
Jul 2022
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The influences of process parameters and vacuum position in vacuum die casting technology on the viscosity and mechanical parcels of ADC12 amalgamation die castings were studied. Standard die casting tensile testing samples were produced on a 650t cold chamber die casting machine with different vacuum pressures from 5kPa to 100kPa and different casting pressures from66.7 MPs to22.7 MPa. Other operating conditions were kept constant. viscosity, ultimate tensile strength, yield strength and extension were measured. .
KEYWORDS
Publication Date
7/16/2022
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...