Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM32627
Volume:
8 |
4 |
Apr 2024
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
This present paper deals with analysis of triangular plate with free clamped-free boundary condition for different materials. The analysis performed for isotropic right triangular plate and for symmetrically laminated/composite triangular plates. For symmetrically laminated/composite triangular plate different materials as FRP, rubber, plastic are consider. The work is divided into two parts i.e. FEM analysis and experimental modal analysis. The object of modal analysis is to find out modal parameters as frequency and mode shapes. In experimental work, triangular plates fabricated and by using FFT analyzer, the modal parameters are determined. The results obtained in analysis compared graphically
KEYWORDS
Publication Date
12/31/45414
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...