Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
10.55041/IJSREM39138
Volume:
8 |
11 |
Nov 2024
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The study analysed how operating parameters like initial pH, TDS, EC, BOD, COD, and electrolyte concentration affect colour removal and energy use. Findings showed that colour removal improved with longer electrolysis time, higher current density, increased sodium chloride concentration, and the use of multiple electrodes. The best results were achieved at an initial pH of 6.5–8.5, 120 minutes of operation, a current density of 61.8, and specific anode-cathode arrangements. The results confirmed that electrocoagulation is more effective than adsorption for treating paper and pulp wastewater, as evidenced by the significant colour change after treatment.
KEYWORDS
Publication Date
11/27/2024
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
2
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...