DESIGN AND IMPLEMENTATION OF RADIX-4-8 MODIFIED BOOTH’S ENCODER USING FPGA

DESIGN AND IMPLEMENTATION OF RADIX-4-8 MODIFIED BOOTH’S ENCODER USING FPGA

 Soundarya K1, Soundarya A1, Kalavathi K P1, Sindhu K2

1Student of Department of Electronics and Communication Engineering, Dayananda Sagar Academy of Technology and Management, Bangalore-560082, Karnataka

2Assistant Professor, Department of Electronics and Communication Engineering, Dayananda Sagar Academy of Technology and Management, Bangalore-560082, Karnataka

*Corresponding Author: soundaryagowdaa619@gmail.com

Abstract

We describe a unique design methodology of approximate radix-4 Booth multipliers that can be produced at a reasonable cost and that can greatly lower the power consumption of signal processing activities that are error-resilient. The suggested method takes into account two important processing steps simultaneously by requiring the generated error directions to be opposite to each other, in contrast to previous studies that only concentrate on the approximation of either the partial product generation with encoders or the partial product reductions with compressors. In comparison to the previous designs, the suggested approximation Booth multiplier can minimize the needed processing energy under the same number of approximate bits since the internal mistakes are naturally balanced to have zero mean. This suggested multiplier design was created in Verilog HDL, simulated using Xilinx and Modelsim 6.4c.