Loading article...
Loading article...
Stream/Area:
-
Subject:
-
Paper ID:
IJSREM22309
Volume:
7 |
5 |
May 2023
Pages:
Publication Frequency:
Monthly (12 issues per year)
License:International Journal of Scientific Research in Engineering and Management follows the Creative Commons Attribution 4.0 (CC BY 4.0) License, allowing free use and distribution with proper attribution.
The “Precise Wood Engraving Machine” project is primarily used to accurately and correctly cut mild steel, plastic, and wood plates into various shapes. The pantograph, a mechanical linkage connected in a parallelogram-based fashion and used for copying and scaling line drawings with complex images, is included in this machine along with the conventional cutting tools. The working principle of a four-bar mechanism in which one link is fixed while the others pivot. These other links move in sync with the tracing link. This device is inexpensive and highly useful. In this project, a model of the “Precise Wood Engraving Machine” will be created using CAD software such as AutoCAD, Pro-E, Solid Works, etc. The machine’s performance would be reduced if the components that are readily available in the marketplace were taken into account, which would result in a poor surface finish.
KEYWORDS
Publication Date
4/5/2023
Peer Review Type
Double-Blind Peer Review
Review Rounds: 2
Documents
Article Views
0
Total views since publication
PDF Downloads
1
Total downloads since publication
Geographic Reach
5
Digital Preservation: This article is permanently archived on Zenodo and complies with all data preservation standards across major indexing platforms.
Plagiarism Screening
This manuscript has been checked for plagiarism using TurnitinPlagiarismChecker software.
Conflict of Interest
The authors declare no conflict of interest related to this research work.
Funding Information
No funding information available for this research.
Related research in the same subject area
Loading similar articles...