IOT BASED TEMPERATURE AND HEART RATE MONITORING SYSTEM

IOT BASED TEMPERATURE AND HEART RATE MONITORING SYSTEM

HEALTH MONITORING SYSTEM

_________________________________________________________________________________

Name: M.SARAVANAKUMAR

 ^AUTHOR Name: M.SARAVANAKUMAR

Designation of 1^st Author:THIRUTHANGAL-626130

Name of Department of :COMPUTER SCIENCE

Name of organization: INFORMATION TECHNOLOGY

City: SIVAKASI

 Country: INDIA

Introduction

The main objective of the project is to monitor the patient pulse rate in a graphical view. The pulse sensor can be attached in the patient finger, which helps to find the current pulse rate of the patient. The pulse rate will get view to the display with the pulse rate and graphical view to the doctor. The changes in the pulse rate can be directly view in the monitor. If the patient pulse rate decrease to below 65 or increase above 80, the doctor should check the status of patient. Each second the patient should be monitor by some person, thus the range of pulse can be checked. In the absence of person, if the pulse rate comes below the range or increases it will create a huge problem for the patient. To overcome this problem, the GSM get attached to the Arduino board and thus when the pulse get increase or decrease it will trigger the GSM to SMS the doctor. For each bed the GSM number will be differ, thus the doctor can came to know the respective patient and the doctor can take necessary step for the patient. The temperature of the patient is monitored by using Mlx90614 Contactless IR Infrared Temperature Sensor Module. If the temperature increases, the GSM triggers to send a current temperature as SMS to the respective doctor as an alert intimation. This process will fulfill the requirement of both doctor and patient in an effective manner.